Dr. Praveen Kumar M V

1. Materials Today: Proceedings (Elsevier) | 24 (2020) 1644–1653

“Dual matrix and reinforcement particle size (SPS and DPS) composites: Influence on Mechanical

behavior of particulate Aluminum-SiC-Graphite metal matrix composites.”

2. Materials Today: Proceedings (Elsevier) | 24 (2020) 1634–1643

“Dual matrix and reinforcement particle size (SPS and DPS) composites: Influence on

Tribological behavior of particulate Aluminum-SiC-Graphite metal matrix composites.”

3. Journal of Metallurgy and Material Science | Vol. 61, No. 4, 2019, pp. 185-198

“Study on the evaluation of Tribological properties of Al-SiC-Gr reinforced composites developed

by Powder Metallurgy route.”

4. Journal of Metallurgy and Material Science | Vol. 61, No. 4, 2019, pp. 205-211

“Study of Thermal Conductivity of the Al-SiC-Gr reinforced metal matrix composites developed by Powder Metallurgy technique.”

5. Journal of The Institution of Engineers (India): Series D (Springer) |

https://doi.org/10.1007/s40033-021-00319-5

“Study of Mechanical Properties of SiC and Gr Reinforced Al7075 Powder Metallurgy Composites and Analysis of Results using ANOVA.”

6. Int. J. Computational Materials Science and Surface Engineering (Inderscience) | Vol. 11, No.2, 2022

“Study of wear properties of Al7075-SiC-Gr composites using Taguchi and ANOVA methods.”

7. SAETechnical Papers | SAE 2025-01-5008, 2025, doi:10.4271/2025-01-5008

“Mitigating Carbon Dioxide Emissions in Diesel Engines Through the Application of Physical Adsorbents.”

8. International Journal of Thermofluid (Elsevier) | doi.org/10.1016/j.ijft.2025.101442, 2025

“Regression Analysis to Predict the Performance of Acetone and SWCNT Nano Fluids in Oscillating Heat Pipe.”

9. Results in Surfaces and Interfaces (Elsevier) | https://doi.org/10.1016/j.rsurfi.2025.100680, 2025

“Impact of waveform shape on the properties of Ni coatings in pulsed electro-deposition for durability of industrial surfaces: A comparative study of rectangular and triangular pulses.”

10. Canadian Metallurgical Quarterly

https://doi.org/10.1080/00084433.2026.2631254

(Taylor & Francis), 2026

“Experimental investigation of fused filament fabrication process parameters on the mechanical performance of carbon fiber reinforced PEEK composites.”

11. Johnson Matthey Technology Review | doi.org/10.1595/205651326X17549280158352, 2026

“Sustainable Lubrication Solutions: Rheological and Tribological Analysis of ZDDP-Enhanced Castor and Cashew Nutshell Oil Biogenic Greases.”

12. Surface Review and Letters | doi.org/10.1142/S0218625X26500125, 2026

“Investigation of Mechanical and Erosion Behaviour of HVOF Sprayed of Cermet Based alloy Coatings on Inconel 718 Superalloy.”

13. Canadian Metallurgical Quarterly (Taylor & Francis) | Ref: Cryogenic Alloys

“Influence of Cryogenic treatment on the microstructure and Mechanical behavior of LM13 Aluminum Matrix composites reinforcement with nano-ZrO2.”

14. Surface Science and Technology | Ref: Oxidation Metallurgy

“Evaluation of Plasma-Sprayed NiCrAlY/Cr3C2/h-BN Coatings Oxidation Behavior on T22 Boiler Steel Alloy.”

15. Journal of Low Frequency Noise, Vibration & Active Control | Ref: Predictive Maintenance

“Vibration Analysis of Gear Tooth for Fault Diagnosis with simulation.”

16. Springer Nature Publication Framework | Ref: ML Materials Optimization

“Surface roughness and MRR prediction in WEDM of Al7075 using CAT boost in comparison with decision tree and Naïve Bayes models.”

17. International Journal of Engineering & Science Research (IJESR) | Special Issue, Article No 01, 2019

“Study on the evaluation of Mechanical properties of Al-SiC-Gr reinforced composites developed by Powder Metallurgy route.”

18. International Journal of Engineering & Science Research (IJESR) | Special Issue, Article No 62, 2019

“Evaluation of Mechanical properties of Aluminum 7075 reinforced with Silicon Carbide and Graphite composites prepared by Powder Metallurgy Technique.”

    (a) Scopus Link: Dr. Praveen Kumar M V - Google Scholar

    (b) Orcid id: https://orcid.org/0009-0000-4960-2633