Manipal > Institutions > Engineering > MIT Manipal > Departments > Aeronautical & Automobile > Research


Select Details 


  • Dr Ramamohan Pai

    1. "Stability of four – axial and six axial grooved water lubricated journal bearings under dynamic load ", J.J.Engineering Tribology, Vol.222, 2008.
       

  • Dr Raviraj Shetty

    1. "Tribological studies on discontinuously reinforced aluminum composites based on the orthogonal arrays", ARPN Journal of Engineering and applied science Vol.3 no.1, pp.94-92, ISSN 1819-6608, 2008.
    2. "Study of Surface roughness minimization in turning of DRACs using Response surface methodology and Taguchi under pressured steam jet approach", ARPN Journal of Engineering and applied science Vol.3 no.1, pp.59-67, ISSN 1819-6608, 2008.
    3. "A Pressured steam jet approach to tool wear minimization in cutting of metal matrix composites", Materials Science forum, Vol.561-565, pp.643-646, ISSN 0255-5476, 2007.
    4. "Steam as coolant and lubricant in turning of metal matrix composites", Journal of Zhejiang University Sciences, Vol.9(09), pp.1245-1250, ISSN 1673-565X(print), ISSN 1862-1775(online), 2008.
    5. "Finite element modeling of stress distribution in the cutting path in machining of discontinuously reinforced aluminum composites", ARPN Journal of Engineering and applied science, Vol.3 no.4, pp.25-31, ISSN 1819-6608, 2008.
    6. "Experimental studies on turning of discontinuously reinforce aluminum composites under dry, oil, water, emulsion and steam lubricated conditions using Taguchi’s technique", Gazi University journal of science, Vol.21 no.2, pp.33-36, ISSN 1303-9709, 2009.
    7. "Machinability of study on DRACs using response surface methodology & Taguchi’s design of experiments under dry cutting condition", Maejo international Journal of science and technology, Vol.2(01), pp.227-239, ISSN 1905-7873, 2008.
    8. "Experimental & analytical study on chip formation mechanism in machining of DRCAs", ARPN Journal of Engineering and applied science, Vol.3 no.5, pp.27-32, ISSN 1819-6608, 2008.
    9. "Taguchi’s technique in machining of metal matrix composites", Journal of Brazilian society of mechanical science, Vol.31 no.1, pp.12-20, ISSN 0100-7386, 2009.
  • Mr Laxmikanth G Keni

    1. "Finite element modeling of stress distribution in the cutting path in machining of discontinuously reinforced aluminum composites", ARPN Journal of Engineering and applied science, Vol.3 no.4, pp.25-31, ISSN 1819-6608, 2008.
    2. "Experimental studies on turning of discontinuously reinforce aluminum composites under dry, oil, water, emulsion and steam lubricated conditions using Taguchi’s technique", Gazi University journal of science, Vol.21 no.2, pp.33-36, ISSN 1303-9709, 2009.